Sampled Boost Levels | Measurable PSI is dependant on several factors including but not limited to; temperature, barometric pressure (including humidity and altitude) and flow characteristic modifications such as a 'cold air intake', exhaust (headers, high flow cat, cat-back exhaust etc), cam (springs, push rods, rockers etc) Many other manufacturers and retailers will market their pulleys by whatever generic boost level or horsepower gain, but the Pulley Boys prefer to list pulleys by actual size and give sample data where possible that is reported by actual customers. All pulley sizes listed are as measured over the ribs where the belt contacts. Pulley Boys do not warrantee any claims as to performance of any given pulley including typographical errors or damage caused by over-boost conditions. Care must be taken when knock retard or ping (detonation) occurs. If you would like to contribute information to this database, please email the pulymkr. |
|
Pulley Size | PSI | |
PB 3.3" | 9 PSI | |
PB 3.1" | 10.5 PSI | |
SKU51 |
Sampled Boost Levels | Measurable PSI is dependant on several factors including but not limited to; temperature, barometric pressure (including humidity and altitude) and flow characteristic modifications such as a 'cold air intake', exhaust (headers, high flow cat, cat-back exhaust etc), cam (springs, push rods, rockers etc) Many other manufacturers and retailers will market their pulleys by whatever generic boost level or horsepower gain, but the Pulley Boys prefer to list pulleys by actual size and give sample data where possible that is reported by actual customers. All pulley sizes listed are as measured over the ribs where the belt contacts. Pulley Boys do not warrantee any claims as to performance of any given pulley including typographical errors or damage caused by over-boost conditions. Care must be taken when knock retard or ping (detonation) occurs. If you would like to contribute information to this database, please email info@pulleyboys.com. |
||
Pulley Size | RSX | Type R | |
JR 4.0" | 5 PSI | ||
PB 3.4" | 7 PSI | ||
PB 3.2" | 9 PSI | 7 PSI | |
PB 3.0" | 11 PSI | 9 PSI | |
SKU1 |
Sampled Boost Levels | Measurable PSI is dependant on several factors including but not limited to; temperature, barometric pressure (including humidity and altitude) and flow characteristic modifications such as a 'cold air intake', exhaust (headers, high flow cat, cat-back exhaust etc), cam (springs, push rods, rockers etc) Many other manufacturers and retailers will market their pulleys by whatever generic boost level or horsepower gain, but the Pulley Boys prefer to list pulleys by actual size and give sample data where possible that is reported by actual customers. All pulley sizes listed are as measured over the ribs where the belt contacts. Pulley Boys do not warrantee any claims as to performance of any given pulley including typographical errors or damage caused by over-boost conditions. Care must be taken when knock retard or ping (detonation) occurs. If you would like to contribute information to this database, please email the pulymkr. |
|
Pulley Size | PSI | |
JR 4.4" | 5~6 PSI | |
JR 4.0" | 7~8 PSI | |
PB 3.8" | 10 PSI | |
PB 3.7" | ||
SKU53 |
Sampled Boost Levels | Measurable PSI is dependant on several factors including but not limited to; temperature, barometric pressure (including humidity and altitude) and flow characteristic modifications such as a 'cold air intake', exhaust (headers, high flow cat, cat-back exhaust etc), cam (springs, push rods, rockers etc) Many other manufacturers and retailers will market their pulleys by whatever generic boost level or horsepower gain, but the Pulley Boys prefer to list pulleys by actual size and give sample data where possible that is reported by actual customers. All pulley sizes listed are as measured over the ribs where the belt contacts. Pulley Boys do not warrantee any claims as to performance of any given pulley including typographical errors or damage caused by over-boost conditions. Care must be taken when knock retard or ping (detonation) occurs. If you would like to contribute information to this database, please email the pulymkr. |
||
Pulley Size | PSI | ||
Stock PES G2 | 3.15" | 6 PSI | |
Pulley
Boys recommended size |
2.9" | 9 PSI | |
2.8" | 10 PSI | ||
SKU9 |
Sampled Boost Levels | Measurable PSI is dependant on several factors including but not limited to; temperature, barometric pressure (including humidity and altitude) and flow characteristic modifications such as a 'cold air intake', exhaust (headers, high flow cat, cat-back exhaust etc), cam (springs, push rods, rockers etc) Many other manufacturers and retailers will market their pulleys by whatever generic boost level or horsepower gain, but the Pulley Boys prefer to list pulleys by actual size and give sample data where possible that is reported by actual customers. All pulley sizes listed are as measured over the ribs where the belt contacts. Pulley Boys do not warrantee any claims as to performance of any given pulley including typographical errors or damage caused by over-boost conditions. Care must be taken when knock retard or ping (detonation) occurs. If you would like to contribute information to this database, please email the pulymkr. |
||
Pulley Size | PSI | ||
Stock 4.0L | 2.3" | 6~7 PSI | |
2.2" | |||
2.1" | 9 PSI | ||
2.0" | |||
1.9" | |||
SKU10 |
Sampled Boost Levels | Measurable PSI is dependant on several factors including but not limited to; temperature, barometric pressure (including humidity and altitude) and flow characteristic modifications such as a 'cold air intake', exhaust (headers, high flow cat, cat-back exhaust etc), cam (springs, push rods, rockers etc) Many other manufacturers and retailers will market their pulleys by whatever generic boost level or horsepower gain, but the Pulley Boys prefer to list pulleys by actual size and give sample data where possible that is reported by actual customers. All pulley sizes listed are as measured over the ribs where the belt contacts. Pulley Boys do not warrantee any claims as to performance of any given pulley including typographical errors or damage caused by over-boost conditions. Care must be taken when knock retard or ping (detonation) occurs. If you would like to contribute information to this database, please email the pulymkr. |
||
Pulley Size | PSI | ||
Stock 4.0L | 2.3" | 5.5~6 PSI | |
2.2" | |||
2.1" | |||
2.0" | 8 PSI | ||
1.9" | 9 PSI | ||
SKU31 |
Sampled Boost Levels | Measurable PSI is dependant on several factors including but not limited to; temperature, barometric pressure (including humidity and altitude) and flow characteristic modifications such as a 'cold air intake', exhaust (headers, high flow cat, cat-back exhaust etc), cam (springs, push rods, rockers etc) Many other manufacturers and retailers will market their pulleys by whatever generic boost level or horsepower gain, but the Pulley Boys prefer to list pulleys by actual size and give sample data where possible that is reported by actual customers. All pulley sizes listed are as measured over the ribs where the belt contacts. Pulley Boys do not warrantee any claims as to performance of any given pulley including typographical errors or damage caused by over-boost conditions. Care must be taken when knock retard or ping (detonation) occurs. If you would like to contribute information to this database, please email the pulymkr. |
|
Pulley Size | PSI | |
2.85" Stock 94~95 |
||
2.7" | ||
2.6" | ||
2.55" Stock 92~93 |
||
2.5" recommended size for 94~95 |
||
2.4" | ||
2.3" | ||
2.2" recommended size for 92~93 |
'92-93
= 10-11 PSI '94-95 = 12-13 PSI |
|
2.1" | ||
2.0" | ||
SKU39 |
1900 Sampled Boost Levels | Measurable PSI is dependant on several factors including but not limited to; temperature, barometric pressure (including humidity and altitude) and flow characteristic modifications such as a 'cold air intake', exhaust (headers, high flow cat, cat-back exhaust etc), cam (springs, push rods, rockers etc) Many other manufacturers and retailers will market their pulleys by whatever generic boost level or horsepower gain, but the Pulley Boys prefer to list pulleys by actual size and give sample data where possible that is reported by actual customers. All pulley sizes listed are as measured over the ribs where the belt contacts. Pulley Boys do not warrantee any claims as to performance of any given pulley including typographical errors or damage caused by over-boost conditions. Care must be taken when knock retard or ping (detonation) occurs. If you would like to contribute information to this database, please email the pulymkr. SKU1211 |
||
Pulley Size | PSI | ||
3.6" | OEM | 5~6 PSI | |
3.5" | 7~8 PSI | ||
3.4" | |||
3.3" | |||
3.2" | 2300 Sampled Boost Levels | ||
Pulley Size | PSI | ||
3.8" | OEM | 5~6 PSI | |
3.5" | |||
3.4" | |||
3.3" | |||
3.2" | 9~10 PSI |
Sampled Boost Levels | Measurable PSI is dependant on several factors including but not limited to; temperature, barometric pressure (including humidity and altitude) and flow characteristic modifications such as a 'cold air intake', exhaust (headers, high flow cat, cat-back exhaust etc), cam (springs, push rods, rockers etc) Many other manufacturers and retailers will market their pulleys by whatever generic boost level or horsepower gain, but the Pulley Boys prefer to list pulleys by actual size and give sample data where possible that is reported by actual customers. All pulley sizes listed are as measured over the ribs where the belt contacts. Pulley Boys do not warrantee any claims as to performance of any given pulley including typographical errors or damage caused by over-boost conditions. Care must be taken when knock retard or ping (detonation) occurs. If you would like to contribute information to this database, please email the pulymkr. |
||
Pulley Size | PSI | ||
Stock | 2.8" | 4 PSI | |
2.7" | |||
Neuspeed "High Alt Pulley" | 2.6" | 9 PSI | |
2.5" | |||
2.4" | 11 PSI | ||
2.3" | |||
2.2" | 15 PSI | ||
2.1" | |||
2.0" | |||
1.9" | |||
SKU42
|
Sampled Boost Levels | Measurable PSI is dependant on several factors including but not limited to; temperature, barometric pressure (including humidity and altitude) and flow characteristic modifications such as a 'cold air intake', exhaust (headers, high flow cat, cat-back exhaust etc), cam (springs, push rods, rockers etc) Many other manufacturers and retailers will market their pulleys by whatever generic boost level or horsepower gain, but the Pulley Boys prefer to list pulleys by actual size and give sample data where possible that is reported by actual customers. All pulley sizes listed are as measured over the ribs where the belt contacts. Pulley Boys do not warrantee any claims as to performance of any given pulley including typographical errors or damage caused by over-boost conditions. Care must be taken when knock retard or ping (detonation) occurs. If you would like to contribute information to this database, please email the pulymkr. |
||
Pulley Size | PSI | ||
Stock TRD | 3.2" | 2.5~3 PSI | |
3.1" | |||
3.0" | |||
recommended size | 2.9" | 5.5 PSI | |
2.8" | 6 PSI | ||
2.7" | |||
2.6" | 7 PSI | ||
2.5" | |||
2.4" | 8 PSI | ||
SKU391
|
Sampled Boost Levels | Measurable PSI is dependant on several factors including but not limited to; temperature, barometric pressure (including humidity and altitude) and flow characteristic modifications such as a 'cold air intake', exhaust (headers, high flow cat, cat-back exhaust etc), cam (springs, push rods, rockers etc) Many other manufacturers and retailers will market their pulleys by whatever generic boost level or horsepower gain, but the Pulley Boys prefer to list pulleys by actual size and give sample data where possible that is reported by actual customers. All pulley sizes listed are as measured over the ribs where the belt contacts. Pulley Boys do not warrantee any claims as to performance of any given pulley including typographical errors or damage caused by over-boost conditions. Care must be taken when knock retard or ping (detonation) occurs. If you would like to contribute information to this database, please email the pulymkr. SKU64 |
|
Pulley Size | PSI | |
TRD 2.65" over-drive pulley | 5.25 PSI | |
TRD 2.37" Stock Pulley | 6 PSI | |
2.3" | 8.5 PSI | |
2.2" | 9.5 PSI | |
2.1" | 10-11 PSI | |
2.0" | 13-14 PSI |
Sampled Boost Levels | Measurable PSI is dependant on several factors including but not limited to; temperature, barometric pressure (including humidity and altitude) and flow characteristic modifications such as a 'cold air intake', exhaust (headers, high flow cat, cat-back exhaust etc), cam (springs, push rods, rockers etc) Many other manufacturers and retailers will market their pulleys by whatever generic boost level or horsepower gain, but the Pulley Boys prefer to list pulleys by actual size and give sample data where possible that is reported by actual customers. All pulley sizes listed are as measured over the ribs where the belt contacts. Pulley Boys do not warrantee any claims as to performance of any given pulley including typographical errors or damage caused by over-boost conditions. Care must be taken when knock retard or ping (detonation) occurs. If you would like to contribute information to this database, please email the pulymkr. SKU641 |
||
Pulley Size | 2.4L | 2.7L | |
2.92" | TRD 2.4 PSI | ||
2.75" | TRD OEM | ||
2.6" | 6 PSI | ? | |
2.5" | 7-8 PSI | ? | |
2.4" | 9 PSI | 7-8 PSI | |
2.3" | 10 PSI | ? | |
2.2" | ? | ? | |
2.1" | ? | ? | |
2.0" | ? | ? |